ちゃんとした NC-UVA3MAX Origin sensor replacement restores accurate carriage zeroing on this desktop UV printer. NC-UVA3MAX は Epson I3200-U1HD ヘッドを 1 つ使用します, 297×420 mm、メディア高さ 0 ~ 90 mm でプリント, CMYK+W+V を最大で実行 1200 dpi, 今後のRIP, 140W, AC220/110V, エコUVインク, 25–28℃ / 35–65%相対湿度, 64 kg . The origin sensor tells the control board where the carriage starts on the X axis. A dirty lens, weak signal or failed sensor causes homing failure, wrong start margin, repeated origin errors or the carriage drifting toward the cap station. 純正の Nocai センサーを取り付けると安定したレジストレーションが得られます.
Check before replacing
プリンターの電源を切り、プラグを抜きます, then engage emergency stop if fitted. Move the carriage away from the home side by hand or through the isolated panel. First clean the sensor window with a lint-free wipe and ≥99% isopropyl alcohol—ink mist often causes false faults. Reseat the connector and inspect the cable for looseness or breaks. Only proceed when the error remains after cleaning and reseating.
古いセンサーを取り外します
ブラケットを写真に撮る, ケーブルルート, connector and flag position. Disconnect the sensor cable from the mainboard or intermediate plug and label it. Unscrew the old sensor and lift it out gently. Note the detection direction and the gap to the carriage flag. Check the lens, cable and bracket for ink buildup, impact marks or physical damage. Do not bend the cable or touch the nearby encoder strip.
新しいセンサーを取り付けます
Mount the OEM Nocai origin sensor in the exact original orientation. Align the sensing slot or face with the carriage flag or reflector, keep the manual-specified gap, 傾かないようにネジを軽く締めます. ケーブルの配線を X 軸ベルトから離して再配線します。, キャリッジパスと UV ランプエリア, 次にコネクタをロックします. Confirm the sensor does not touch the moving flag.
Home and test
非常停止を解除する, power on and run the homing sequence. The carriage should move to the origin and stop accurately without overshoot. Move left and right to confirm the X-axis position updates smoothly. In Future RIP, run a nozzle check, step grid and alignment pattern; 開始マージンがドリフトする場合, サービスメニューで原点オフセットを調整します. Stable homing completes the NC-UVA3MAX Origin sensor replacement.
交換後のケア
毎週センサーウィンドウをアルコールで拭いてください, 旗にインクの粉が付かないようにしてください, ケーブルタイとブラケットのトルクを毎月確認してください. Service the rail, encoder strip and cap station per manual, and use only Nocai original sensors and eco UV ink to protect print accuracy and after-sales support.