NC-UVA3MAX Origin sensor replacement

Thích hợp NC-UVA3MAX Origin sensor replacement​ restores accurate carriage zeroing on this desktop UV printer. The NC-UVA3MAX uses one Epson I3200-U1HD head, prints 297×420 mm with 0–90 mm media height, runs CMYK+W+V at up to 1200 dpi, RIP tương lai, 140W, AC 220/110V, mực UV sinh thái, 25–28°C / 35–65% RH, 64 kg . The origin sensor tells the control board where the carriage starts on the X axis. A dirty lens, weak signal or failed sensor causes homing failure, wrong start margin, repeated origin errors or the carriage drifting toward the cap station. Lắp cảm biến Nocai chính hãng đăng ký ổn định.

Check before replacing

Tắt nguồn và rút phích cắm máy in, then engage emergency stop if fitted. Move the carriage away from the home side by hand or through the isolated panel. First clean the sensor window with a lint-free wipe and ≥99% isopropyl alcohol—ink mist often causes false faults. Reseat the connector and inspect the cable for looseness or breaks. Only proceed when the error remains after cleaning and reseating.

Tháo cảm biến cũ

Chụp ảnh khung, tuyến cáp, connector and flag position. Disconnect the sensor cable from the mainboard or intermediate plug and label it. Unscrew the old sensor and lift it out gently. Note the detection direction and the gap to the carriage flag. Check the lens, cable and bracket for ink buildup, impact marks or physical damage. Do not bend the cable or touch the nearby encoder strip.

Cài đặt cảm biến mới

Mount the OEM Nocai origin sensor in the exact original orientation. Align the sensing slot or face with the carriage flag or reflector, keep the manual-specified gap, và siết nhẹ vít để tránh bị nghiêng. Định tuyến lại cáp ra khỏi đai trục X, đường vận chuyển và khu vực đèn UV, sau đó khóa đầu nối. Confirm the sensor does not touch the moving flag.

Home and test

Nhả nút dừng khẩn cấp, power on and run the homing sequence. The carriage should move to the origin and stop accurately without overshoot. Move left and right to confirm the X-axis position updates smoothly. In Future RIP, run a nozzle check, lưới bước và mẫu căn chỉnh; nếu lề bắt đầu trôi đi, điều chỉnh phần bù gốc trong menu dịch vụ. Stable homing completes the NC-UVA3MAX Origin sensor replacement.

Chăm sóc sau thay thế

Lau cửa sổ cảm biến hàng tuần bằng cồn, giữ cho lá cờ không có bụi mực, và kiểm tra dây buộc cáp và mô-men xoắn của khung hàng tháng. Service the rail, encoder strip and cap station per manual, and use only Nocai original sensors and eco UV ink to protect print accuracy and after-sales support.