Lắp đặt máy mới NC-UV0609MAX-II

56 Lượt xem

Thích hợp NC-UV0609MAX-II New Machine Installation​ makes this 600×900 mm industrial UV printer production-ready. The NC-UV0609MAX-II uses Epson industrial heads per BOM—official configuration lists 13200-U1 white, 13200-U1HD color, and 11600-U1 varnish—supports CMYK+LC+LM+LK+LIK+W+V, 720×600/900/1200 dpi, 0–Chiều cao 180mm, negative-pressure eco UV ink, Máy chủ mini FlexiPRINT 22 Nocai, 470W, AC 220/110V, and 25–28°C / 35–65% RH. Commissioning covers uncrating, khởi tạo, phần mềm, đổ mực, sự định cỡ, and test printing for stable output.

Chuẩn bị địa điểm và dỡ bỏ

Đặt 226 kg printer on a stable, level base indoors with air conditioning and grounding; remove the wooden case and foot-cup fixed frame before use. Keep 25–28°C / 35–65% RH, tránh bụi, sunlight, and flammable areas. Verify local voltage matches the nameplate. Because the machine weighs 226 kg net and 430 kg gross, use at least four people to move it safely.

Power-on initialization

Connect power, turn on the rear main switch, and press the front boot button. The printer runs initialization: ink station descends, wiper moves, carriage shifts, platform moves, carriage returns above the ink station, and the head is capped. Open the driver software after connecting the computer; confirm “online” and control left/right, front/back, and Z-axis motion normally.

Software, driver and ink filling

On a Windows PC, install the runtime components, Nocai driver, and FlexiPRINT MiniServer 22; connect the printer via network cable and configure the port. Add genuine Nocai eco UV ink by color labels, then run manual pumping until ink flows without air. Use original ink only—non-Nocai ink voids after-sales support.

Calibration and test printing

Run new-machine calibration in order: kiểm tra vòi phun, step calibration, căn chỉnh theo chiều dọc, and bidirectional calibration. Print a nozzle test strip; nếu kênh bỏ lỡ, run automatic cleaning and retest. Load a sample acrylic or gift-box file, set head height 2–3 mm, and print. When color, registration, and varnish are correct, the NC-UV0609MAX-II New Machine Installation​ is complete and the printer is ready for production.

Chăm sóc sau khi cài đặt

Chạy kiểm tra vòi phun hàng ngày, keep negative-pressure ink clean, và duy trì 25–28°C / 35–65% RH. Service the wiper, cap station, encoder strip, and rails per the manual. Ghi lại phiên bản phần mềm, màu mực, and calibration values for future maintenance.