NC-UVDTF60 喷嘴板更换

69 次

恰当的 NC-UVDTF60 Nozzle plate replacement​ becomes necessary when the printhead shows persistent nozzle clogging, 物理损坏, or degraded print quality that cleaning cycles cannot resolve. The nozzle plate is the final ink ejection surface; a worn, scratched, or clogged plate causes missing nozzles, ink deflection, and poor image quality. Replacing it restores jetting performance and extends printhead life. Because this procedure involves delicate printhead components, always power off the printer and follow the steps carefully. Use only genuine NOCAI parts to maintain warranty coverage.

准备

关闭打印机电源并断开电源线. Wear antistatic gloves and a wrist strap. 准备一个干净的, static-free workspace with good lighting. 你将需要: a new genuine NOCAI nozzle plate matched to your printhead model (i1600 or i3200), 无绒湿巾, 异丙醇 (≥99%), 精密螺丝刀套装, 镊子, and the NC-UVDTF60-PLUS user manual.

拆下旧喷嘴板

打开前盖，将小车移至维护位置. Locate the printhead and carefully unscrew the retaining screws holding the old nozzle plate. 轻轻地将板从打印头主体上提起. 请勿触摸裸露的墨水通道或喷嘴表面. 妥善处理旧盘子.

清洁安装面

使用沾有异丙醇的无绒抹布清洁打印头上的安装表面. 清除所有干燥的墨水残留物和碎片. 让表面完全干燥 2-3 分钟. 检查是否有划痕或毛刺; 如果存在, 在继续之前请联系 NOCAI 支持.

安装新喷嘴板

将新喷嘴板与打印头上的定位销对齐. 轻轻地将其按到位. 以十字方式拧紧固定螺钉，以确保压力均匀. 扭矩符合维修手册中的规格 (通常为 0.3–0.4 N·m). 不要拧得太紧, 因为这可能会使盘子破裂.

测试和校准

重新连接电源并从控制面板运行喷嘴检查. 如果仍有喷嘴缺失, 执行温和的清洁周期. 打印测试图案以验证对齐和颜色均匀性. 如有必要，调整双向偏移. 一旦输出符合您的质量标准, the NC-UVDTF60 Nozzle plate replacement​ is complete and the printer is ready for production.

更换后护理

在最初的几个小时内密切监控打印质量. 安排后续喷嘴检查 8 营业时间. 如果雨刷片出现磨损，请更换. 更换后正确维护可确保长期可靠性.