NC-UVA3MAX 更换墨垫

恰当的 NC-UVA3MAX Ink Pad Replacement​ keeps the waste-ink system clean on this desktop UV printer. NC-UVA3MAX使用1个Epson I3200-U1HD头, 打印尺寸为 297×420 毫米,介质高度为 0–90 毫米, 运行 CMYK+W+V 的速度高达 1200 分辨率, Future RIP, 140瓦, 交流220/110V, 环保UV油墨, 25–28°C / 35–65% 相对湿度, 64 千克 . 自动清洁期间, scraping and pumping, excess ink collects near the cap station and waste path. A saturated or hardened pad causes overflow, chassis contamination, odor and nozzle problems. Swapping in a genuine Nocai pad restores safe waste management.

准备

Power off and unplug the printer before any maintenance . Wear nitrile gloves and place a tray under the cap station. Prepare a new OEM Nocai ink pad, 无绒湿巾, 经紫外线认证的清洁溶液, 镊子, a small screwdriver and absorbent paper. Move the carriage to the maintenance position from the panel. 拍摄车站盖子, pad tray and waste tube before removal so nothing is reassembled wrongly.

Remove the old pad

Open the cap-station cover and locate the waste pad beside or under the capping area. Lift the old pad gently with tweezers—do not squeeze it, because trapped UV ink may leak. If your unit routes waste to a bottle instead of a sponge pad, disconnect the tube and empty or replace the bottle. Seal all waste in a plastic bag for proper chemical disposal.

Clean and install the new pad

Wipe the tray with cleaning-solution-moistened wipes to remove dried ink and debris. Check the waste tube for blockage and flush it if needed, then let the tray dry. Fit the OEM pad flat across the whole tray bottom without folds or gaps. Reinstall the cap-station cover, reconnect the waste tube and make sure the tube has no kinks near the carriage path.

Test and verify

Power on and enter the maintenance menu. Run manual pumping, then Auto Cleaning so the system scraps, washes and caps the head. Watch the waste path for leaks. 在透明介质上打印喷嘴测试; all CMYK+W+V channels should fire evenly with no streaks. No overflow means the NC-UVA3MAX Ink Pad Replacement​ is complete.

更换后护理

第一个月每周检查一次垫子或瓶子, 然后每月. 保持房间温度在 25–28°C / 35–65% 相对湿度, clean the cap station regularly, and use only Nocai original pads and eco UV ink to protect print quality and after-sales support.