NC-UVA3MAX 替代光柵感知器

恰當的 NC-UVA3MAX Replacement of grating sensor​ restores accurate X-axis reading on this desktop UV printer. NC-UVA3MAX使用1個Epson I3200-U1HD頭, 列印尺寸為 297×420 毫米,介質高度為 0–90 毫米, 運行 CMYK+W+V 的速度高達 1200 解析度, 未來安息吧, 140瓦, 交流220/110V, 環保UV油墨, 25–28°C / 35–65% 相對濕度, 64 公斤 . The grating sensor reads the encoder strip and reports carriage position to the board. A dirty lens, misaligned slot or failed reader causes banding, ghosting, homing errors or X-position drift. Fitting a genuine Nocai sensor returns stable tracking.

Check before replacing

關閉印表機電源並拔掉電源插頭, then engage emergency stop if fitted. Move the carriage to mid-beam. First clean the sensor window and the encoder strip with a lint-free wipe and ≥99% isopropyl alcohol—ink mist often causes false faults . Reseat the connector and inspect the cable for looseness or breaks. Only proceed when the error remains after cleaning and reseating.

拆下舊感應器

拍攝支架, 電纜路線, connector and strip slot position. Disconnect the sensor cable from the mainboard or intermediate plug and label it. Unscrew the old reader and lift it out gently. Note the reading direction and the gap to the encoder strip. Check the lens, cable and bracket for ink buildup, impact marks or physical damage. Do not bend the strip or touch its scale surface.

安裝新感應器

Mount the OEM Nocai grating sensor in the exact original orientation. Pass the encoder strip through the sensor slot without contact or tilt, keep the manual-specified gap, and tighten screws lightly. 重新佈置電纜,使其遠離 X 軸皮帶, 運輸路徑和紫外線燈區域, 然後鎖定連接器. Confirm the strip moves freely through the slot.

Home and test

解除緊急停止, power on and run the homing sequence. The carriage should move left and right with smooth, increasing X-values and no jumps. In Future RIP, run a nozzle check, 階梯網格和對齊圖案; measure printed size against design size. Stable readings complete the NC-UVA3MAX Replacement of grating sensor.

更換後護理

Wipe the sensor window and encoder strip weekly with alcohol, keep the slot dust-free, 並避免裸手觸摸秤. Service the rail and cap station per manual, and use only Nocai original sensors and eco UV ink to protect print accuracy and after-sales support.