적절한 NC-UVA3MAX Origin sensor replacement restores accurate carriage zeroing on this desktop UV printer. NC-UVA3MAX는 Epson I3200-U1HD 헤드 1개를 사용합니다., 0~90mm 용지 높이로 297×420mm 인쇄, 최대 CMYK+W+V를 실행합니다. 1200 dpi, 미래의 RIP, 140여, AC 220/110V, 에코 UV 잉크, 25-28°C / 35-65% 상대습도, 64 kg . The origin sensor tells the control board where the carriage starts on the X axis. A dirty lens, weak signal or failed sensor causes homing failure, wrong start margin, repeated origin errors or the carriage drifting toward the cap station. 정품 노카이 센서를 장착하면 안정적인 정합이 가능합니다..
Check before replacing
프린터 전원을 끄고 플러그를 뽑습니다., then engage emergency stop if fitted. Move the carriage away from the home side by hand or through the isolated panel. First clean the sensor window with a lint-free wipe and ≥99% isopropyl alcohol—ink mist often causes false faults. Reseat the connector and inspect the cable for looseness or breaks. Only proceed when the error remains after cleaning and reseating.
오래된 센서를 제거하세요
브래킷 사진 촬영, 케이블 경로, connector and flag position. Disconnect the sensor cable from the mainboard or intermediate plug and label it. Unscrew the old sensor and lift it out gently. Note the detection direction and the gap to the carriage flag. Check the lens, cable and bracket for ink buildup, impact marks or physical damage. Do not bend the cable or touch the nearby encoder strip.
새 센서 설치
Mount the OEM Nocai origin sensor in the exact original orientation. Align the sensing slot or face with the carriage flag or reflector, keep the manual-specified gap, 기울어지지 않도록 나사를 가볍게 조이세요.. X축 벨트에서 멀리 케이블 경로를 변경합니다., 캐리지 경로 및 UV 램프 영역, 그런 다음 커넥터를 잠급니다.. Confirm the sensor does not touch the moving flag.
Home and test
비상 정지 해제, power on and run the homing sequence. The carriage should move to the origin and stop accurately without overshoot. Move left and right to confirm the X-axis position updates smoothly. In Future RIP, run a nozzle check, 단계 그리드 및 정렬 패턴; 시작 마진이 표류하는 경우, 서비스 메뉴에서 원점 오프셋 조정. Stable homing completes the NC-UVA3MAX Origin sensor replacement.
교체 후 관리
매주 알코올로 센서 창을 닦으십시오., 깃발에 잉크 먼지가 묻지 않게 하세요, 매달 케이블 타이와 브래킷 토크를 확인하세요.. Service the rail, encoder strip and cap station per manual, and use only Nocai original sensors and eco UV ink to protect print accuracy and after-sales support.