NC-UV0406-VI Instalación de máquina nueva

71 Vistas

Adecuado NC-UV0406-VI New Machine Installation​ makes the A2 desktop UV printer production-ready. The NC-UV0406-VI uses two Epson I1600-U1 heads, prints 400×600 mm flatbed areas, handles 0–180 mm media height, and supports CMYK+W or CMYK+W+V at up to 1200 ppp. It runs FlexiPRINT MiniServer Nocai Edition, uses eco UV ink, and serves flat panels plus optional cylindrical tumblers. The machine requires AC 220/110V, 143W., and works best at 25–28°C / 35–65% HR. Puesta en marcha correcta: desempaquetado, software, llenado de tinta, inicialización, calibración, and test printing—ensures stable output from day one.

Site preparation and uncrating

Place the 118 kg printer indoors with air conditioning and grounding. Keep the room dust-free and away from sunlight. Verify local voltage matches AC 220/110V before connection. Remove the wooden case and foot-cup frame, then move the machine onto a stable table using enough personnel. Check the packing list, power cord, cartuchos de tinta, herramientas, and manual before power-on.

Computer, driver and FlexiPRINT

Prepare a 64-bit Windows PC with sufficient CPU, 16 + GB de RAM, gigabit network adapter, and stable IP settings; exact versions follow the shipped manual. Install the driver as administrator, then install FlexiPRINT MiniServer Nocai Edition. Create the NC-UV0406-VI printer profile, set 400×600 mm canvas, configure CMYK+W or CMYK+W+V channels, and connect via network cable. Confirm the software shows “online” before any printing.

Ink filling and initialization

Power on the printer and complete the boot initialization. Follow the “Add Ink” chapter to fill each color with genuine Nocai eco UV ink—non-Nocai ink affects after-sales support. Fill white ink in small amounts after shaking to avoid sediment. Run manual inking to remove air, then auto cleaning. Imprimir una prueba de boquillas; repeat cleaning until all channels fire evenly.

Flatbed and cylindrical testing

For flatbed jobs, enable table suction, load acrylic or aluminum, set head height within 0–180 mm, and send a calibration chart. Check vertical alignment, registro de color, y curado UV. For cylindrical mode, install the optional rotary fixture, clamp cups or bottles of supported diameter, set 360° parameters in FlexiPRINT, and print a wraparound sample. When both modes pass, the NC-UV0406-VI New Machine Installation​ is complete and ready for production.

Post-installation care

Run daily nozzle checks and weekly wiper cleaning. Keep white ink circulating, maintain 25–28°C / 35–65% HR, and use only Nocai original ink, dampers, and spare parts. Record software version, ink colors, and calibration values in the service log for future maintenance.