NC-UVA3MAX Replacement of grating sensor
2026-11-22 55 Ansichten
Richtig NC-UVA3MAX Replacement of grating sensor restores accurate X-axis reading on this desktop UV printer. Der NC-UVA3MAX verwendet einen Epson I3200-U1HD-Kopf, Druckt 297 x 420 mm mit einer Medienhöhe von 0–90 mm, führt CMYK+W+V mit bis zu aus 1200 dpi, Zukünftiger RIP, 140W, Wechselstrom 220/110 V, Öko-UV-Tinte, 25–28°C / 35–65 % relative Luftfeuchtigkeit, 64 kg . The grating sensor reads the encoder strip and reports carriage position to the board. A dirty lens, misaligned slot or failed reader causes banding, ghosting, homing errors or X-position drift. Fitting a genuine Nocai sensor returns stable tracking.
Check before replacing
Schalten Sie den Drucker aus und ziehen Sie den Netzstecker, then engage emergency stop if fitted. Move the carriage to mid-beam. First clean the sensor window and the encoder strip with a lint-free wipe and ≥99% isopropyl alcohol—ink mist often causes false faults . Reseat the connector and inspect the cable for looseness or breaks. Only proceed when the error remains after cleaning and reseating.
Entfernen Sie den alten Sensor
Fotografieren Sie die Halterung, Kabeltrasse, connector and strip slot position. Disconnect the sensor cable from the mainboard or intermediate plug and label it. Unscrew the old reader and lift it out gently. Note the reading direction and the gap to the encoder strip. Check the lens, cable and bracket for ink buildup, impact marks or physical damage. Do not bend the strip or touch its scale surface.
Installieren Sie den neuen Sensor
Mount the OEM Nocai grating sensor in the exact original orientation. Pass the encoder strip through the sensor slot without contact or tilt, keep the manual-specified gap, and tighten screws lightly. Verlegen Sie das Kabel weg vom X-Achsen-Riemen, Schlittenweg und UV-Lampenbereich, Verriegeln Sie dann den Stecker. Confirm the strip moves freely through the slot.
Home and test
Not-Aus lösen, power on and run the homing sequence. The carriage should move left and right with smooth, increasing X-values and no jumps. In Future RIP, run a nozzle check, Schrittraster und Ausrichtungsmuster; measure printed size against design size. Stable readings complete the NC-UVA3MAX Replacement of grating sensor.
Betreuung nach dem Wechsel
Wipe the sensor window and encoder strip weekly with alcohol, keep the slot dust-free, und vermeiden Sie es, die Waage mit bloßen Händen zu berühren. Service the rail and cap station per manual, and use only Nocai original sensors and eco UV ink to protect print accuracy and after-sales support.
Nocai – Professioneller Hersteller von UV-Druckern | Digitaldrucklösungen