نوكاي – الشركة المصنعة لطابعة الأشعة فوق البنفسجية المهنية | حلول الطباعة الرقمية
NC-UV0406-VI ink absorber pad replacement
سليم NC-UV0406-VI ink absorber pad replacement keeps the Epson I1600-U1 printheads clean during maintenance cycles. الطابعة NC-UV0406-VI عبارة عن طابعة UV لسطح المكتب مقاس A2 مزودة برؤوس I1600-U1 مزدوجة, 400×600 ملم مسطحة, وأوضاع CMYK+W/V. The absorber pad collects waste UV ink from cleaning, capping, and purging. Over time it becomes saturated, causing ink overflow, poor capping, and even printhead damage. Replacing the pad when needed ensures stable suction and clean nozzles.
تحضير
قم بإيقاف تشغيل الطابعة وافصلها. ارتداء قفازات النتريل. افتح الغطاء وحرك الحامل إلى وضع الصيانة. Prepare a new genuine Nocai absorber pad, مناديل خالية من الوبر, Nocai محلول التنظيف بالأشعة فوق البنفسجية, مفك براغي فيليبس, وكماشة. Photograph the waste tube routing and sensor position. Check the maintenance station area for ink leaks or hardened residue before starting.
إزالة الوسادة القديمة
Locate the absorber pad tray under the maintenance station. Remove the screws or clips holding the tray. Gently slide out the old pad. Note the sensor position so you can reinstall it correctly. Dispose of the saturated pad as chemical waste. Inspect the tray for ink crust; إذا كان موجودا, clean it later. Avoid touching the capping rubber with bare hands.
تثبيت الوسادة الجديدة
Clean the tray with Nocai UV cleaning solution and let it dry. Insert the new OEM pad into the tray, aligning it with the sensor and tube openings. Reinstall the tray and tighten screws lightly—do not over-torque. Reconnect any waste tubes and confirm the sensor wire is seated. Ensure the pad sits flat and the cap unit aligns with the printhead.
Counter Reset and Testing
قم بتشغيل الطابعة. Open FlexiPRINT or the printer driver; reset the waste ink counter if your machine has this function. Run two or three cleaning cycles, ثم قم بطباعة اختبار الفوهة. All channels should fire evenly with no streaks or overflow. Check the pad area for leaks. When the test is clean, the NC-UV0406-VI ink absorber pad replacement is complete and the printer is ready for production.